750kg Standard Lever Hoist View larger

750kg Standard Lever Hoist

New product

Lightweight, compact and rugged construction with the handle, gear case and brake cover made entirely of pressed steel, producing strong resistance to impact damage. Using only the highest quality materials precisely machined throughout ensures the TLH11 is the ideal hoist for long term use with less maintenance and servicing costs.

More details

  •  MAIN FEATURES

    • Range from 250kg 10000kg
    • 360 degree handle rotation
    • Drop forged & heat treated alloy hooks
    • Guaranteed light load protection
    • Operating temperature of -40C to +50C
    • Also available with stainless steel load chain
    • Rugged steel body construction
    • Short stroke and low lever pulling effort
    • High quality alloy calibrated load chain
    • Heat treated alloy steel triple spur gears and pinion shaft
    • Proof tested to 1.5 times rated capacity
    • Individual spares readily available
    • Lightweight and portable
    • Easy single-hand "freewheeling" operation
    • Safe reliable twin pawl mechanical brake
    • Heavy duty chain end stop
    • 1.5m height of lift as standard but can be chained to exact requirements
    • Meets or exceeds all international standards

    Safety Brake:

    The highly efficient twin pawl brake, works instantly when the operation is stopped and securely holds the load. Designed and 100% tested to hold a 5% load of the rated capacity. The bonded friction discs are free of asbestos and achieve highly efficient braking.

    Certification:

    Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. This document clearly states the proof test at 1.5 times the rated capacity and the light load test of 5% of the rated capacity, which exceeds the requirements of the current applicable standard.

    Load Chains:

    Tiger only use the highest quality alloy, calibrated load chains in Grade 80 (T) or 100 (V). Also available with stainless steel load chain.

    Hooks:

    Drop forged and heat treated alloy hooks are furnished with heavy duty latch kits that fully engage into the nose of the hook offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts & bolts allowing for complete inspection during any statutory inspection or written scheme maintenance. Recessed forgings offer full protection to the load chain anchor bolts on all our bottom hooks.

    Grease:

    High performance premium quality grease allows the TLH11 hoists to be certified for use within a temperature range of -40C to +50C far exceeding the requirements of current standards.

    Chain end stops:

    User friendly heavy duty end stops make it easy for the operator to position the chain whilst "freewheeling" but most importantly gives complete compliance to all known standards.

    Mechanical Efficiency:

    All major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.

    Finish:

    The TLH11 is finished in our high quality powder coat paint offering excellent corrosion protection.

    Proof Load Tests:

    Every lever hoist is fully tested to 1.5 times its rated capacity.

     

    Stockist:

    Offering full UK coverage of Lifting Equipment & Safety Equipment to Devon & Cornwall from our Plymouth site, Wales and Midlands from our Bristol site, North East, Midlands and North West from our London site along with Scotland, Northern Ireland and Ireland being covered by Belfast and Dublin.

    For all your Chain blocks and hoisting requirements contact your local office by email here

6 other products in the same category: